Every month GalwayGates.com/Ken Carr Ironworks installs over 8 electric gate and gate automation systems. We install electric gates throughout Ireland. We continually seek out the latest in quality and safety standards when buying in gate automation kits and access control equipment. For the next three months any of the access control options you choose to install with a gate automation system will be installed at cost price. So from 21/6/13 until 21/9/13 this offer will last. Below is descriptions of whate included in this special offer:
Each of these Access Control Options Will come at cost price when you choose to install one of our Gate Automation Systems:
GSM Dial To Open: €150
The unit above is a very clever device. When this system you have the option of dialling a phone number which has been assigned to your electric gate system. The system will ring twice and automatically hang up costing you nothing for the phone call. As soon as the system hangs up a relay switch becomes activated and an open command is given to your gates. The beauty of this system is that you have unlimited range as the signal is carried over the phone networks. Whether you are 3 or 3000 miles away from your home you can open your gates within a matter of seconds. Alternatively if you have an entrance that is very close to the roadside and you want your gates to be fully opened before your car arrives at the entrance then this GSM Dial-To-Open device is the perfect Access Control Option For you. Call today for enquiries on any of our access control options or visit our contact page and fill in our query form.
Ground Loop Magnetic Detection Device for Gate Automation €150
This is a very unique device which makes access control and entry completely trouble free. A coil of sensory cable is placed just beneath the surface of the driveway and wired back to the ground loop detection unit. The sensor cable emits a magnetic field when connected to the detection unit. When a vehicle passes over the sensor coil a relay switch becomes activated in the unit which gives the electric gate / gate automation system an open command. You literally have nothing to do only drive out of the premises. Where there is a long driveway we generally put the sensor coil a good distance back from the gates so that by the time you get there the gates are open. This saves you the trouble of having to find your remote keyfob or enter any codes into keypad in order to leave a premises. Alternatively ground loops can be placed outside a premises to let vehicles in. Ground loops outside the gates are usually governed by an on/off switch inside the premises. If you wish to learn anymore about groundloops or any other access control devices associated with gate automation please do not hesitate to contact us.
Proximity Card Readers €100
Proximity card readers are the perfect answer to Multi-occupancy premises. They can come combined in a coded entry keypad unit. Any number of cards can be programmed into the reader. They are perfect for staff carparks, underground car parks or just about any area where only designated personnel are permitted to enter. Proximity card readers not only work with gate automation / electric gates but also with door mag locks and pedestrian gates. If you would like more information on proximity card readers please do not hesitate to contact us.