Gate Automation Kits

GalwayGates.Com is almost ready to open its brand new online store! In January 2014 GalwayGates.Com will have a fully stocked online store including all types of gate automation kits and every type of Access Control Technology available. Thank you for patiently waiting on our new store.

“You might ask, why should I buy DEA?”

• DEA Gate Automation Kits come with a full four years manufacturers warranty covering Mechanical Parts and Control panel. No other Gate Automation Brand even comes close to the warranty provided by DEA.
• DEA feature Anti-Crush technology across multiple models.
• DEA meet all of the European safety regulations.
• When you buy a DEA kit from us we will also provide you with full technical support.
• We promise next day delivery.
• We provide free mechanical stops with our underground systems.
• We offer free shipping on orders over €500.
• We offer advise on what type of system would best suit your entrance, taking into account costs and practicality.
• You can buy online over Paypal, the most trusted and secure online shopping medium.

Below are some examples of the DEA Gate Automation Kits that we will have on offer:

DEA Ghost Kit 200

The above gate automation kit is the DEA GHOST 200 kit. It is by far the most popular electric gate kit that we have ever installed. Its very popular due to its sheer power and safety aspects coupled with a full four years manufacturers warranty. The Ghost 200 is an underground electromechanical gate opener which is more than suitable for most domestic and commercial automation applications. The motors are very powerful in terms of gate automation motors. Each motor is rated at 400 watts. The kit comes with mechanical stops in both the open and close positions. These stops are installed below ground level within the motors foundation box. When the motor reaches the fully open or closed stops the gates will lock firmly in position.  In the event of any power failure manual release is achieved through the use of very easy to use manual release keys. However if you opt for the DC version of this gate automation kit you will also receive a battery back-up which will open your gates at least 20 times without power. The underground motors come with 8 metres of lead length meaning that the motors can easily be wired back to the control panel without the need for any joint boxes meaning a simpler install. It is also possible to to open the gate 180 degrees through the use of a simple chain mechanism which will also be available from our store. As with any electric gate system safety is our main priority. The DEA 202R that comes with this kit features many safety aspects namely the soft stop and anti-crush features. If you are wondering what these features are please view the videos by clicking here. If you have any questions regarding any aspects of this gate automation kit please do not hesitate to call our technical advise number. Frankie will be sure to look after any of your queries.

So what exactly comes with this gate automation kit?

• 2x 200 ghost motors (8m cable)
• 2x 215 Galvanized Foundation boxes
• 2x TR2 MIO remote controls
• 1x Lumy/A flashing Light with built-in 433 Mhz aerial
• 1x set of 104 Minilux photocells
• 1x 127 warning sign
• 1x 202/RR control Board
• 4 year warranty

_____________________________________________________________________________________________

DEA KIT LOOKThe kit above is the DEA LOOK electromechanical linear arm overground gate automation kit. Its sleek looks, rock solid reliability, power and all round functionality make this gate automation kit a popular choice for a broad spectrum of swing gate installations. The motors are very powerful and are rated at 300 watts each. The gates will lock tightly against the opening and closing stops in both positions. This DEA kit is available in two lengths, 520mm or 320mm depending if the leaf lengths are up to 4.5m and 2.5m respectively. This kit is available in either AC or DC with batery backup on the latter.

• What comes with the Kit Look?

• 2x LOOK motors
• 2x TR2 MIO remote controls
• 1x Lumy/A flashing Light with built-in 433 Mhz aerial
• 1x set of 104 Minilux photocells
• 1x 127 warning sign
• 1x 202/RR control Board
• 4 year warranty

__________________________________________________________________________________

DEA OLI 600 KIT

The above gate automation kit is the OLI 600 series. It is an electro-hydraulic ram operated gate automation system.  It is suitable for both residential and industrial swing gate applications. They are very powerful and quiet in operation and have a high duty cycle. No electric lock is  needed with these rams as they are self locking. Torque (turning power) of the rams can be set up or down by simple adjustment of the pressure valves featured on each hydraulic ram. As with any DEA gate automation system two manual release keys are supplied with the kit which will allow you to open the gates in the event of a power failure.

What comes with the Oli 600 series kits?

• 2x OLI motors (various models available)
• 2x TR2 MIO remote controls
• 1x Lumy/A flashing Light with built-in 433 Mhz aerial
• 1x set of 104 Minilux photocells
• 1x 127 warning sign
• 1x 202/RR control Board
• 4 year warranty

________________________________________________________________________

DEA KIT 502

The above gate automation kit “LIVI 502” will suit most types of swing gate. The motor housings can be bolted onto large posts or onto the back of a block peer. The Livi 502 can offer the ideal solution where drainage for underground motors may be an issue due to a high water table. The Livi 502 Gate automation motors are self locking and a separate electric lock is not necessary.  This type of installation is much easier and faster than underground operators and will not require any modification of the gates structure. This clever electric gate system is also available in 24 V DC with a battery back-up in the event of power outage. It also comes with motor slow down at the end of each stroke and also features the extremely important anti-crush device.

        What you get:

• 2x 502 motors
• 2x 560A Aluminum articulated arm
• 2x TR2 MIO remote controls
• 1x Lumy/A flashing Light with built-in 433 Mhz aerial
• 1x set of 104 Minilux photocells
• 1x 127 warning sign
• 1x 202/RR control Board
• 4 year warranty

________________________________________________________________________________

DEA KIT 400

LIVI 400 Gate Automation Kit for sliding gates:

The LIVI 400 is an electromechanical operator for sliding gates for up to 900 kg. Its sleek design and rock solid reliability make this electric gate kit a market leader when it comes to sliding gate automation. It incorporates both an electronic and a mechanical clutch to ensure safety. The motor has a built in control board which means you dont have to have an external control board which means a quicker and easier installation. The built-in control board comes complete with anti-crush safety technology, built-in 433MHz radio receiver, speed adjustment during normal cycle and slow down in opening and closing.The LIVI Kit like all of our other ranges comes in a DC version which has battery back up as standard.

What you get with this Gate Automation Kit

• 1 x 6RR motor with built-in control board (for gates up to 600kg)
• 3 x TR2 MIO rolling code remotes
• 1 x set of 104 minilux photocells
• 1 x Lumy/A Flashing light with 433 Mhz aerial
• 1 x 127 Warning Sign

__________________________________________________________________________________

DEA MAC KIT

The DEA Kit MAC is an electromechanical ram. This means that it does not use hydraulics but instead uses a gear and jack screw coming off the motor shaft. The kit is capable of pushing a 2m leaf at 400kg. Like the above models this system also incorporates anticrush technology which is an absolute must in todays safety conscious environment.

What you get with the DEA MAC Gate Automation Kit:

• 2x MAC motors (various versions)
• 2x TR2 MIO remote controls
• 1x Lumy/A flashing light with built-in 433Mhz aerial
• 1x set of 104 minilux photocells
• 1x 127 warning sign
• 1x 202RR/C control board
• 4 year warranty

_____________________________________________________________________________________________

DEA GEKO KIT

The above GEKO Gate automation kit is one of our most popular kits when it comes to overground automation. These kits are especially handy where you have a high water table or water logged land where underground automation is not an option. This kit comes with all of the DEA safety technology incorporated like soft start, soft stop and anticrush technology.

The GEKO Gate Automation kit includes:

2x GEKO motors with NET24 control panel
2x TR2 MIO remote controls
1x Lumy/24A/S flashing light with built-in aerial
1x Set of 104 minilux photocells
1x Pair of aluminium articulated rms
1x 127 warning sign
4 year warranty