These iron gates are made completely from 1.5” box iron. A lot of work goes into this type of design as each square is fabricated using four mitered sides with a welded seam right around each and then ground down smooth. This design gives a very secure look. These gates are fully automated using a […]Contact Us
These box iron gates are made completely from box iron mild steel. A lot of work goes into this type of design as each of the box iron gates are fabricated using mitered box section with a welded seam right around each and then ground down smooth.
The design of box iron gates gives a very secure look. These gates are fully automated using a FAAC underground electric gate system. If you would like a quote on these gates or if you would like to receive a quote on an electric gate system with a set of box iron gates please visit our contact page and quote the design reference there. All of our box section gates come hot dipped galvanised and also have a choice of being painted any colour with a spray paint or powder paint finish. All of these gate designs are designed fabricated and welded by Kenneth Carr Ironworks, Roscahill, Co Galway. If you would like information on our electric gate systems please ask our partners at www.automatedgates.ie or www.galwayelectrician.ie. We use only the very best in quality and professional line of electric gate controls and control systems from the respected brand names including FAAC, Comelit and ACT. These professional grade electric gate controls and control systems are among the most robust and reliable for single gates, dual swing gates and slide gates. These systems will guarantee trouble free operation of your electric gate system. Call Kenenth Carr on 0879060091 for advise on gate design and fabrication or if you would like technical advise on electric gate / gate automation installations or servicing call Frankie on 0877955570. Galway gates.com are here to provide you with the best possible advise and we are sure to guide you in the right direction when it comes to choosing your Iron Gates/ gate automation system.
These gates have been designed to continue the modern design of the dwelling all the way to the entrance. They have also been designed to accommodate the rising driveway so that the gates will not scrape along the surface when opening inwards. These gates have also been fully automated with an underground electric gate system. […]Contact Us