These iron gates are made completely from 1.5” box iron. A lot of work goes into this type of design as each square is fabricated using four mitered sides with a welded seam right around each and then ground down smooth.  This design gives a very secure look.  These gates are fully automated using a […]

These iron gates feature a box section frame with a double curved flat iron top. Ironwork designs such as spikes, rings, scrolls, baskets and back to back c-scrolls can be seen throughout. . If you would like a quote on this gate or if you would like to receive a quote on an electric gate […]

These beautiful Iron gates Feature a box section sweeping frame with decorative spikes, c-scrolls and collars throughout. We have also fully automated these iron gates with a FAAC underground electric gate system and intercom with keypad. If you would like to obtain a quote on this type of gate or if you would like to […]

Fleur de leur spikes, half scrolls and S-Scrolls are features throughout these Iron Gates. The gates are fabricated with a box section frame, curved flat iron top and 16mm solid bar throughout. If you would like a quote on this gate or if you would like to receive a quote on an electric gate system […]

These Iron Gates feature a standard spike along the upper and lower parts of the gate. There are also medium sized collars along the upper and lower areas of the gates with large collars following the sweeping contour all along the middle of the gates. Half collars can also be seen along the bottom of […]